LABORATORY GRINDING MILLS

6 Many accessories are available for the 01 Series. With the basic mill, one can equip it for metal-free grinding. Note, the same tanks can be used for the 01/HD-01 or the HDDM-01 modes. The 01/HD-01 series can be equipped for grinding under inert gases and for cryogenic grinding. The special covers fit all tank sizes (110cc, 750cc, and 1400cc). Most parts are interchangeable. Each size tank does need its own shaft and arms, and arm lengths do vary depending upon the size of media being used. There is also a special cooling water jacket and tank with a valve at the bottom so one can discharge the slurry and even hook-up a small pump for circulation. Please see the list below of all accessories available. Tank Options (approx. gross volume) — For use with all 01 Series Attritors ■ Stainless steel 110cc, 750cc, 1400cc ■ Tefzel ® -coated stainless steel 110cc, 750cc, 1400cc ■ Polyethylene 110cc, 750cc, 1400cc ■ Alumina 750cc, 1400cc ■ Zirconium oxide 750cc, 1400cc ■ Silicon nitride 750cc, 1400cc ■ Silicon carbide 750cc, 1400cc Agitator Arms — For use with 01 and HD-01 Models The following arms can be installed in either stainless steel, plastic coated, or zirconium oxide shafts: ■ Colmonoy ® * ■ Stainless steel ■ Plastic coated, steel reinforced* ■ Tungsten carbide* ■ Silicon nitride ■ Zirconium oxide* *Available for 110cc tanks. Agitator Disks — For use with HDDM-01 Models ■ Tool Steel (hardened) ■ Plastic ■ Stainless Steel (440C) ■ Zirconium oxide Covers — For use with 01 and HD-01 Models ■ 2-piece aluminum, stainless steel or plastic ■ 1-piece stainless steel with simplified, mechanical shaft seal with gas inlet/outlet and charging port ■ 1-piece stainless steel with Teflon floating seal, charging port, and vent for grinding in liquid nitrogen (cryogenic grinding) Covers — For use with HDDM-01 Models ■ Stainless Steel Cover with Media Deflector & Floating Seal for HDDM-01 Discharge Valves ■ Cooling water jacket with bottom discharge valve — requires special tank with openings — For use with 01 and HD-01 Models ■ Cooling water jacket with side discharge valve and optional bottom plug valve — for stainless steel tanks only — For use with HDDM-01 Models Special — For use with 01 and HD-01 Models ■ Adapter for quick change of 110cc tanks (polyurethane or stainless steel) Pumps For Circulation — For use with all 01 Series Attritors ■ Air driven, explosion-proof ■ 110V, 1/4 HP, variable speed ■ 110V, 1/4 HP, variable speed, explosion-proof Portable Stand w/Heavy-Duty Casters — For use with all 01 Series Attritors COMPLETE LIST OF ACCESSORIES Tefzel ® is a registered trademark of E.I. DuPont deNemours Co., Inc. Colmonoy ® (a nickel-based alloy) is a registered trademark of Wall Colmonoy Corporation. 01 Series Accessories 01 SERIES ACCESSORIES 1. Silicon Carbide, 1400cc 2. 316 Stainless Steel, 1400cc 3. Ceramic (99.5% Alumina), 1400cc 4. UHMW (Polyethylene), 1400cc 5. Zirconium Oxide, 750cc 6. 316 Stainless Steel, 110cc 7. Tefzel-Coated SS, 750cc 1. One-Piece Stainless Steel Cover with Teflon Seal and Vent for Cryogenic Grinding with Liquid Nitrogen 2. Stainless Steel Cover with Media Deflector and Floating Seal for HDDM-01 3. Special Adapter for Quick-Change of 110cc Tanks 4. One-Piece Stainless Steel Cover with MECO Shaft Seal, Gas Inlet/Outlet, and Charging Port for Grinding Under Inert Gas 5. Two-Piece Plastic Cover 6. Two-Piece 304 Stainless Steel Cover 1. SS Shaft with Lub-R (Plastic) Disks and Spacers, 1400cc 2. SS Shaft with 440C SS Disks and Spacers, 750cc 3. Halar-Coated SS Shaft with Zirconium Oxide Disks and Lub-R (Plastic) Spacers, 1400cc 1. Plastic-Coated Stainless Steel Shaft with Zirconium Oxide Arms, 110cc 2. Stainless Steel Shaft with Tungsten Carbide Arms, 750cc 3. Zirconium Oxide Shaft with Zirconium Oxide Arms, 750cc 4. Plastic-Coated Shaft with Xylethon Sleeved Arms, 750cc 5. Stainless Steel Shaft with Colmonoy Arms, 750cc 6. Stainless Steel Shaft with 440C SS Arms, 1400cc 1 2 3 4 5 6 7 1 2 3 4 6 5 1 2 3 4 5 6 1 2 3 TANKS COVERS AGITATOR DISKS SHAFTS/ARMS

RkJQdWJsaXNoZXIy MTI2MDE=